Best alternatives to ULTRAFILTER Fine element FF 07/30 (AG 0048)

Beste Alternativen zu ULTRAFILTER Feinelement FF 07/30 (AG 0048)

Ersatz für Ultrafilter Filter

Model Number: FF07/30

Anschluss: Endkappen aus Aluminium

Oil : 0.1 mg/m3

Startdifferenzdruck : 0,04 bar

Filtrationsgrad : 0,01 µm

Dichtungsmaterialien: Perbunan Dichtungen

Produktdetails

Ultrafilter offers filter elements for most compressed air applications. These high quality filter elements are made with the finest pleating technology and aluminum end caps. Unique to the industry with their extremely low differential pressure.The FF/MF/SMF filter elements are made with a pleated oleophobic filter media that rejects oil and water.

Advanced pleating techniques mixed with nano technology,makes our “High Performance” filters much more effective than a standard filter, as the pleating provides a 450% larger

filtration surface per square inch. The special pleating also secures a much larger particle retention capacity.The benefits of using this type of filter is low differential pressure, up to 70% lower energy costs and improved efficiency of filtration.

Produkteigenschaften

1.450 % greater filter media compared to standard elements

2.Lower Differenzdruck

3.Verbesserte Filtrationseffizienz

4.Greater Schmutzfangkapazität

5,70 % weniger Energiekosten

Produktparameter

Max Differenzdruck	5 bar bei 20°C
Effizienz	99999%
Grad der Filtration	0,01 µm
Material(e)	Borosilikat, Cerex und Polyurethan
Maximale Temperatur	80°C
Dichtungsmaterialien	Perbunan Dichtungen
Restölgehalt	0,1 mg/m3
Differenzdruck starten	0,04 bar
Verbindung	Endkappen aus Aluminium
Remove Particles	99.999% (0.1 m)
Öl	0,1 mg/m3

Typ	Particle Filtrationsrate	Effizienz	Residual oil content	Max.differential Druck
PE	25 μm	99%	N/A	2 bar at 20°℃
SB	25 μm	99%	N/A	2 bar at 20℃
FF	0,01 μm	99.999%	0,1 mg/m3	5 bar at 20°℃
MF	0,01 μm	99.99998%	0,03 mg/m3	5 bar at 20°℃
SMF	0,01 μm	99,99999%	<001 mg/m3	5 bar at 20°℃
AK	Activated Carbon	N/A	0,003 mg/m3	2 bar at 20°℃